NZXT Technologies Phantom 630 Case CA-PH630-G1 Gun Metal

You looking to find the "NZXT Technologies Phantom 630 Case CA-PH630-G1 Gun Metal" Good news! You can purchase NZXT Technologies Phantom 630 Case CA-PH630-G1 Gun Metal with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $163.00    

Product Feature

• High-end water cooling support allows use of multiple radiators and multiple radiator sizes
• Full external peripheral support with multiple USB 3.0, 2.0 connections and an integrated SD card reader
• Fully modular internal drive bays allows you to customize the Phantom 630?s layout to suite your needs
• Split-level motherboard tray allowing increased rear cable management
• Dual SSD mounts behind the motherboard tray
• Easily removable dust filters protect your components
• Illuminates rear I/O ports internal components with a ick of a switch
• Integrated high-power 30-watt single-channel fan controller

Product Description

Allow us to introduce you to the future. Presenting the NZXT Phantom 630 - a chassis so revolutionary, it may just be the last case you ll ever need. The original Phantom was, in every aspect, undisputed in its design. Bold, striking, timeless, NZXT broke new ground and raised the bar for an entire industry. The design of the Phantom 630 achieves this again while fully satisfying the high demands of those who take computing seriously. The new Phantom 630 brings support for cutting edge features such as simultaneous support for a 3x120 radiator, a 2x120 radiator and all hard drive bays, interchangeable fully-modular HDD cages, pivoting fan mount, and a single 30-watt controller with four high endurance fans included. Naturally, all other features you expect from a high performance NZXT chassis are in. The Phantom 630 breaks tradition and moves you forward in every way. The future is here.

NZXT Technologies Phantom 630 Case CA-PH630-G1 Gun Metal Review

4.5 stars

As the title states, this is a fantastic case, especially for those with hardware that's cramped in a mid-size (this thing is enormous...check my pics for evidence). That said, I had to return the first unit (bought new, from Amazon.com [not third-party]) due to a broken/failed HDD activity light (apparently damaged from the factory, given scratches on the PCB); the replacement works properly. The fan controller works perfectly, but be careful not to bend the connectors when plugging fans into them (I nearly snapped one off; fortunately, there are ten, which is more than anyone will need).

Frustratingly, the biggest drawback of the case, in my opinion, is that the rear LEDs are programmed to come on with every boot; I found this incredibly annoying (they're extremely bright and cannot go unnoticed), and since I'll never use them, I simply disconnected the harness leading to them...problem solved, but one of the case's most notable features is now rendered useless. The included top 200mm fan doesn't seem to move a lot of air; I'd recommend adding a second (200RB; ~800 RPM), as well as installing two 140RB's on the bottom of the unit (as I did; check pictures). This arrangement leads to a positive net pressure scenario (more air being forced in than out), which should keep dust out of the case (because all incoming air enters through filtered fans). The internal pivot fan is awesome, and if you have three or fewer HDDs, you'll only need to use this one HDD module. You can reposition it so that the pivot fan blows directly across your GPUs (see pictures); I immediately noticed temps 5 degrees cooler on both cards after installing my old NZXT 140 liquid bearing fan in the pivot position (connected to the motherboard to vary according to internal temps).

I've read various complaints about the HDD trays; frankly, I found them to be perfect. They couldn't be easier to use, tightly hold my two full-size HDDs and SSD (didn't use the rear SSD mount, as I needed the three-tray HDD unit to be able to use the pivot fan), and honestly, I don't see a valid complaint that can be made about them.

Finally, I highly recommend installing NZXT's white LED set (two meter), as it matches the case's LEDs almost perfectly, and looks amazing (especially with the LEDs bouncing light off the case's white fans).

In conclusion, I believe that this is the best case on the market, at present (short of potential manufacturing/quality control issues), and would state that if you're in the market for a huge case that makes an even bigger statement (with class), you can't do any finer than this model.

Most of the consumer Reviews tell that the "NZXT Technologies Phantom 630 Case CA-PH630-G1 Gun Metal" are high quality item. You can read each testimony from consumers to find out cons and pros from NZXT Technologies Phantom 630 Case CA-PH630-G1 Gun Metal ...